Instructions / Assembly

ASSEMBLY INSTRUCTIONS

C (1)

Place SHELF (C) on its side and slide each BOTTOM

POLE (A) through each corner cylinder on SHELF (C).

Make sure SHELF (C) corner cylinders are positioned

over SLIP SLEEVES (D).

Stand the unit upright.

Note:

• Level side of SHELF (C) is TOP side (TRINITY logo on

corner cylinders should be right-side up.)

• Use a rubber mallet, if needed, to secure SHELF (C).

STEP 3

STEP 4

C (1)

D (8)

On BOTTOM POLE (A), place 1 pair of SLIP

SLEEVES (D) at desired height between

SHELVES (C). Make sure arrow faces up

and word “TOP” is right side up. Do this

for each BOTTOM POLE (A), and make

sure height is identical for each BOTTOM

POLE (A).

Lower SHELF (C) over each BOTTOM POLE

(A) so corner cylinders of SHELF (C) are

positioned over SLIP SLEEVES (D).

Note: Use a rubber mallet, if needed, to

secure SHELF (C).