OWNER’S MANUAL TRINITY PRO ECOSTORAGE® BAMBOO TOP KITCHEN CART Model # TBFZ-1412 / TBFPRA-1412
PARTS LIST Your TRINITY Pro EcoStorage® Bamboo Top Kitchen Cart should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us).
ASSEMBLY INSTRUCTIONS STEP 1 Screw each CASTER (K & L) into threaded insert of each BOTTOM POLE (B). Turn clockwise to screw in place. Make sure LOCKING CASTERS (L) are on same side of Kitchen Cart. Use provided caster WRENCH (M) to tighten completely. Failure to do as instructed could result in caster stem breaking. K (2) B (4) M L (2) M (1) B (4) N (8) B L STEP 2 On BOTTOM POLE (B), place one pair of SLIP SLEEVES (N) at desired height no higher than 3rd indentation from bottom.
ASSEMBLY INSTRUCTIONS STEP 3 Place SHELF (E) on its side and slide each BOTTOM POLE (B) through each corner cylinder of SHELF (E). Make sure corner cylinders are positioned over SLIP SLEEVES (N). E (1) Slowly stand unit upright. Note: • Level side of SHELF (E) is TOP side (TRINITY logo on corner cylinders should be right-side up). • Use a rubber mallet, if needed, to secure SHELF (E). E B E STEP 4 Screw TOP POLES (A) into BOTTOM POLES (B).
ASSEMBLY INSTRUCTIONS STEP 5 Repeat STEP 2 & 3 to attach BASKET (F). N (8) Note: Use a rubber mallet, if needed, to secure BASKET (F). F (1) F N STEP 6 Attach one pair of SLIP SLEEVES (N) to poles on shorter side of Kitchen Cart as below image shows. Make sure SLIP SLEEVES (N) position is at 6th indentation (or below) from pole top to leave enough pole length for other parts. N (4) H (1) Slide SIDEBAR (H) unto poles, make sure corner cylinders are positioned over SLIP SLEEVES (N).
ASSEMBLY INSTRUCTIONS STEP 7 Attach one pair of SLIP SLEEVES (N) to each pole at 2nd indentation below double line. Slide pair of SLIP SLEEVES (N) until you hear a click to confirm they are locked onto TOP POLE (A). N (8) I (2) J (2) Facing side of Kitchen Cart with SIDEBAR (H) attached, slide LEFT ARM (I) unto pole on left side and RIGHT ARM (J) unto pole on right side. Properly positioned, support wires should be on INSIDE of poles facing each other.
ASSEMBLY INSTRUCTIONS STEP 8 Attach one pair of SLIP SLEEVES (N) to each pole at 1st indentation from top. Slide pair of SLIP SLEEVES (N) until you hear a click to confirm they are locked onto TOP POLE (A). N (8) G (1) Place LIP UP SHELF (G) onto poles with corner cylinders positioned over SLIP SLEEVES (N). Note: Use a rubber mallet, if needed, to secure LIP UP SHELF (G).
ASSEMBLY INSTRUCTIONS STEP 10 Take one BAMBOO SIDE BOARD (D), check to make sure rotating locks are parallel to slots on bottom of BAMBOO SIDE BOARD (D). Place BAMBOO SIDE BOARD (D) on a pair of LEFT ARM (I) and RIGHT ARM (J). Push BAMBOO SIDE BOARD (D) against BAMBOO CUTTING BOARD (C) to line them up. Move each support arm to make sure they are sitting inside slots. D (2) Turn rotating locks 90 degrees across slots and wires of LEFT ARM (I) and RIGHT ARM (J) to secure BAMBOO SIDE BOARD (D).
USAGE INSTRUCTIONS Storing Bamboo Side Boards 1. 2. 3. 4. Remove BAMBOO CUTTING BOARD (C). Unlock BAMBOO SIDE BOARD (D) by turning rotating locks so they are parallel to slots. Remove BAMBOO SIDE BOARDS (D) and place them inside LIP UP SHELF (G) side by side. Rotate LEFT ARM (I) AND RIGHT ARM (J) toward long edge of LIP UP SHELF (G) until they rest against shelf. 5.
SERVICE PARTS LIST – TBFZ-1412 (Chrome Color) TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) ONA-20-006-2419 Bamboo Cutting Board 9) ZSV-99-008-3010 Locking Caster 2) ONA-20-007-0819 Bamboo Side Board 10) XXX-97-002-0001 Wrench 3) ZSV-19-013-0925 Right Arm 11) ZSV-99-007-3010 Non-locking Caster 4) ZSV-19-014-0925 Left Arm 12) ZSV-03-071-2216 Shelf 5) ZSV-02-007-0009 Sidebar 13) ZSV-01-030-2523 Pole Connec
SERVICE PARTS LIST – TBFPRA-1412 (Bronze Anthracite Color) TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) ONA-20-006-2419 Bamboo Cutting Board 9) ZSV-99-008-3010 Locking Caster 2) ONA-20-007-0819 Bamboo Side Board 10) XXX-97-002-0001 Wrench 3) PRA-19-013-0925 Right Arm 11) ZSV-99-007-3010 Non-locking Caster 4) PRA-19-014-0925 Left Arm 12) PRA-03-071-2216 Shelf 5) PRA-02-007-0009 Sidebar 13) ZSV-01-029-2523
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed could result in the caster stem breaking thereby causing the cart to collapse. 3. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur.
CARE AND MAINTENANCE • Avoid harsh, abrasive cleaners, and other corrosive chemicals. • Bamboo board should be hand washed only and periodically treated with food safe oil. • Store away bamboo side boards and support arms when not in use. • Keep casters locked when kitchen cart is stored. • This product is designed for indoor use only. © 2019 TRINITY - 800.985.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY Pro EcoStorage® Bamboo Top Kitchen Cart. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY TRINITY Pro EcoStorage® Bamboo Top Kitchen Cart Model # TBFZ-1412 / TBFPRA-1412 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY Pro EcoStorage® Bamboo Top Kitchen Cart (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
