Instructions / Assembly

STEP 4

ASSEMBLY INSTRUCTIONS

STEP 3

E (1)

A (4)

Place SHELF (E) on its side and slide each BOTTOM POLE (B) through each corner cylinder of

SHELF (E). Make sure corner cylinders are positioned over SLIP SLEEVES (N).

Slowly stand unit upright.

Note:

• Level side of SHELF (E) is TOP side (TRINITY logo on corner cylinders should be right-side up).

• Use a rubber mallet, if needed, to secure SHELF (E).

Screw TOP POLES (A) into BOTTOM

POLES (B).

Note:

• Pole Connectors are pre-installed

in bottom of TOP POLES (A).

• The top of TOP POLE (A) is

indicated by a BLACK END CAP.