Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 3: INSTALLING BOTTOM SHELF

Place SHELF (C) on its side and slide the (4)

BOTTOM POLES (A) through the holes in the

SHELF (C). Make sure that the SHELF (C)

corner cylinders are positioned over the SLIP

SLEEVES (D).

Stand the unit upright.

*Note: The level side of the SHELF (C) is the

TOP side (the TRINITY logo on the corner

cylinders should be right-side up.)

**Use a rubber mallet, if needed, to secure

the SHELF (C).

C (1)

STEP 4: INSTALLING SHELVES

On POLE (A), place 1 pair of SLIP SLEEVES (E) at the desired

distance between SHELVES (C). Please make sure the arrow

faces up and that the word “TOP” is right side up. Do this for

each POLE (A), and make sure that the heights are identical

for each POLE (A).

Lower SHELF (C) over the BOTTOM POLES (A) so that the

corner cylinders of the SHELF (C) are positioned over the SLIP

SLEEVES (D).

Repeat Step 4 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the SHELVES (C).

D (8) C (1)