Use and Care Manual

ASSEMBLY INSTRUCTIONS

The Feet Levelers are already screwed into your POLES

(A) and you can adjust as needed to ensure your

Shelving Rack is level.

STEP 4: FEET LEVELERS

A (4)

STEP 3: INSTALLING SHELVES

On POLE (A), place 1 pair of SLIP SLEEVES (C) at the desired

distance between SHELVES (B). Please make sure the arrow

faces up and that the word “TOP” is right side up. Do this for

each POLE (A), and make sure that the heights are identical

for each POLE (A).

Lower SHELF (B) over the POLES (A) so that the corner

cylinders of the SHELF (B) are positioned over the SLIP

SLEEVES (C).

**Use a rubber mallet, if needed, to secure the SHELVES (D).

Repeat Step 3 to install other SHELVES (C) as desired.

C (24) B (3)

NEED

IMAGE

HERE