Installation Guide

A (1)
STEP 4
© 2017 TRINITY - 800.985.5506
3
Place SHELF (A) on its side and slide (4) BOTTOM POLES
(C) through the 4 corner cylinders in SHELF (A). Make
sure SHELF (A) corner cylinders are positioned over
SLIP SLEEVES (G).
Stand the unit upright.
*Note: The level side of SHELF (A) is the TOP side (the
TRINITY logo on corner cylinders should be right-side
up).
**Use a rubber mallet, if needed, to secure SHELF (A).
***For convenience, place BOTTOM POLES (C) with
Locking Casters on the long side of the shelf if the rack
will be pushed against a wall OR if the rack is frequently
rolled around like a cart place BOTTOM POLES (C) with
Locking Casters on the side being pushed or pulled.
A
C
G
Repeat STEP 2 & 3 to place another SHELF
(A) at the desired position of BOTTOM
POLES (C).
**Use a rubber mallet, if needed, to secure
SHELVES (A).
A
C
ASSEMBLY INSTRUCTIONS
STEP 3
G (8)
A (1)