Use and Care Manual

A (1)

STEP 4

Place SHELF (A) on its side and slide (4) BOTTOM POLES

sure SHELF (A) corner cylinders are positioned over

SLIP SLEEVES (G).

Stand the unit upright.

Note:

• The level side of SHELF (A) is the TOP side (the

TRINITY logo on corner cylinders should be right-side

up).

• Use a rubber mallet, if needed, to secure SHELF (A).

• For convenience, place BOTTOM POLES (C) with

Locking Casters on the long side of the shelf if the

rack will be pushed against a wall OR if the rack is

frequently rolled around like a cart place BOTTOM

POLES (C) with Locking Casters on the side being

pushed or pulled.

Repeat STEP 2 & 3 to place another SHELF (A) at

the desired position of BOTTOM POLES (C).

Note: Use a rubber mallet, if needed, to secure

SHELVES (A).

ASSEMBLY INSTRUCTIONS

STEP 3

G (8)

A (1)