Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Stationary Option

Screw each FEET LEVELER (G) into bottom of each

BOTTOM POLE (A). Turn clockwise to screw in place.

Mobile Option

Screw each CASTER (E) into bottom of each BOTTOM

POLE (A). Turn clockwise to screw in place. Make sure

Locking Casters are on the same side.

Use provided caster wrench to tighten completely.

Failure to do as instructed could result in caster stem

breaking.

For easiest assembly, do not attach TOP POLES(B) and BOTTOM

POLES(A) until instructed. Once connected, these will be posts

for the rack.

Note that POLES (A+B) has slight horizontal line indentations at

1" intervals. Each SLIP SLEEVE (D) has raised horizontal lines

inside designed to lock them in place on POLES (A+B).

On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D) at

desired height no higher than 3

indentation from bottom.

Make sure arrow faces up and word "TOP" is right side up.

Slide pair of SLIP SLEEVES (D) until you hear a click to confirm

the pair is locked onto BOTTOM POLE (A). Do this for each

BOTTOM POLE (A) and make sure height is identical for each

BOTTOM POLE (A). Do NOT place more than one pair on each

pole at a time.

Note: There will be a very small gap in-between two locked SLIP SLEEVES (D)—this is normal.

STEP 1

STEP 2

A (4) E (4) G (4)

A (4)

D (8)

F (1)