Use and Care Manual

ASSEMBLY INSTRUCTIONS
STEP 1
Two people are recommended for
ease of assembly.
Attach LEFT & RIGHT BRACKETS (B &
C) to CROSS BEAM (D) as shown,
making sure threaded stud on each
bracket fits into hole on each end of
CROSS BEAM (D). Fasten NUT (E)
onto each threaded stud with
provided WRENCH (F).
Note: LEFT BRACKET (B) has
TRINITY logo embossed.
C
D
E
F
STEP 2
Place WALL MOUNTING TEMPLATE (I)
against wall at your desired location.
With a pencil, mark locations to
install screws.
Notes:
* Please consult a local contractor If
you are unsure if your wall is able to
bear the load of the wall shelf.
** Depending on wall mount
requirement with or without
anchors. Pre-drill appropriate size
hole at each marked location.
I
Screw
holes
© 2023 TRINITY - 800.985.5506
2
B
B (1)
C (1)
D (1)
E (2)
F (1)
I (1)