OWNER’S MANUAL TRINITY ECOSTORAGE® RECLINING ADIRONDACK CHAIR ESPRESSO BROWN / SLATE GRAY Model # THBBR-3103 / THBGR-3103 Important / Important / Importante FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES Directives intelligentes Instrucciones Inteligentes PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LA APLICACIÓN GRATUITA
PARTS LIST Your TRINITY EcoStorage® Adirondack Reclining Chair should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online via “Contact Us” section at www.trinityii.com. You will NOT need additional tools for assembly.
ASSEMBLY INSTRUCTIONS STEP 1 NOTE: Make sure you have parts labeled (C), (E) and (G) for this step. They look very similar to parts (D), (F), and (H). A(1) C (1) 3 Lay SEAT (A) on ground sideways as shown, orient (3) insert nuts on LEFT FRONT LEG (E) to align with (3) holes on SEAT (A). Insert (3) SCREWS (K), from inside, through SEAT (A) and hand fasten to LEFT FRONT LEG (E). Then with HEX KEY (L) tighten (3) SCREWS (K).
ASSEMBLY INSTRUCTIONS STEP 2 Flip over completed assembly from STEP 1 and lay on ground as shown. D(1) F (1) H (1) L (1) K (7) L Orient (2) insert nuts on RIGHT SUPPORT (H) to align with (2) holes on SEAT (A). Insert (2) SCREWS (K), from inside, through SEAT (A) and hand fasten to RIGHT SUPPORT (H). Then with HEX KEY (L) tighten (2) SCREWS (K). 3 K D Orient (3) insert nuts on RIGHT FRONT LEG (F) to align with (3) holes on SEAT (A).
ASSEMBLY INSTRUCTIONS STEP 3 B (1) With 2 people, carefully hold BACKREST (B) over Seat Assembly. Slide Back Support into notches on each side of SEAT (A). B Back Support Seat Assembly STEP 4 On left side, insert SCREW (K) through SEAT (A), BACKREST (B) and WASHER (J). With WRENCH (M) holding NUT (I) in place, tighten SCREW (K) onto NUT (I) with HEX KEY (L). Repeat for right side. I (2) J (2) K (2) L (1) M (1) B L K J © 2020 TRINITY - 800.985.
USAGE INSTRUCTIONS ADJUST SEAT BACK RECLINE POSITIONS There are 3 reclining positions. Lift BACKREST (B) and move Back Support to position you desire. POSITION 1 POSITION 2 POSITION 3 Back Support 5 © 2020 TRINITY - 800.985.
SERVICE PARTS LIST- THBBR-3103 ESPRESSO BROWN TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) PBK-25-005-0002 Back Support 10) XXX-97-002-0006 Wrench 2) XBK-23-004-2540 End Cap 11) XXX-97-001-0001 Hex Key 3) XBR-25-005-0001 Backrest 12) XBR-25-004-0005 Right Front Leg 4) XBK-01-026-0635 Screw 13) XBR-25-004-0004 Right Armrest 5) XBR-25-004-0003 Left Support 14) XSV-01-018-0606 Nut 6) XBR-25-004-0001 Lef
SERVICE PARTS LIST- THBGR-3103 SLATE GRAY TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) PBK-25-005-0002 Back Support 10) XXX-97-002-0006 Wrench 2) XBK-23-004-2540 End Cap 11) XXX-97-001-0001 Hex Key 3) XGR-25-005-0001 Backrest 12) XGR-25-004-0005 Right Front Leg 4) XBK-01-026-0635 Screw 13) XGR-25-004-0004 Right Armrest 5) XGR-25-004-0003 Left Support 14) XSV-01-018-0606 Nut 6) XGR-25-004-0001 Left Ar
