Instructions / Assembly

ManualsBrandsTrinity ManualsCarts, Islands & Utility TablesStainless Steel Kitchen Utility Table with Adjustable Bottom Shelf

1

2

3

4

5

6

7

8

9

ASSEMBLY INSTRUCTIONS

Slide the SHELF (B) over each LEG (C)

to the desired height. Using the provided

HEX KEY (F), tighten the HEX SCREW

(D) into the SHELF (B).

Turn the HEX KEY (F) as far clockwise

as possible, take out the HEX KEY (F),

reposition, reinsert, and turn as far

clockwise as possible again until the

HEX SCREW (D) is securely in place.

Place the SCREW CAP (E) over each

HEX SCREW (D).

Lay the TABLE TOP (A) upside-down on

a smooth flat surface. Insert LEGS (C)

into the round slots on the bottom of the

TABLE TOP (A). Make sure LEGS (C)

are fully inserted into the TABLE TOP

(A).

You will insert and tighten the HEX

SCREWS (D) in Step 3.

STEP 1

STEP 2

A (1) C (4)

E (4) F (1)

D (4)

C

A

B (1)

B

D

E

© 2016 TRINITY - 800.985.5506

3