Instructions / Assembly

STEP 2

Unfold CABINET BODY (A).

A (1)

L (16)

ASSEMBLY INSTRUCTIONS

STEP 1

C (1)

Two people are recommended for ease of assembly.

Stand the unfolded CABINET BODY (A) upside down on

the floor.

Note: There is a 40mm diameter hole on the back panel

of the CABINET BODY (A). When the CABINET BODY (A)

is upside down, this hole should be in the upper left

corner of the back panel.

Turn BOTTOM PANEL (C) upside down. Tilt the front

diagonally downward. First, insert the lip into the inner

side of the tab of CABINET BODY (A) at the right side,

then insert into the left side.

Follow the order indicated, insert (12) BLACK SCREWS

(L) through holes on BOTTOM PANEL (C) and tighten

fully with a Phillips screwdriver. Insert (4) BLACK

SCREWS (L) through the tabs on the front of CABINET

BODY (A) and tighten fully to BOTTOM PANEL (C).

hole

tab

lip