Instructions / Assembly

STEP 6
Note: RIGHT DOOR (E) has a lock on it.
Attach LEFT DOOR (D) to the cabinet by sliding the
LEFT DOOR (D) onto the pivot of door hinge which
is welded to the BOTTOM PANEL (C)
Position LEFT DOOR HINGE (F) at the left front
corner of TOP PANEL (B). Make sure to insert the
pivot of DOOR HINGE (F) fully into the cylinder on
the LEFT DOOR (D). Align holes on DOOR HINGE (F)
to pre-installed nuts on TOP PANEL (B). Insert
BLACK SCREWS (L) through these holes. Tighten
fully with a Phillips screwdriver.
Repeat for RIGHT DOOR (E).
Adjust FEET LEVELER (J) as needed to ensure your
cabinet is level and stable.
G (1)
ASSEMBLY INSTRUCTIONS
STEP 5
I (4)
E (1)
L (4)
F (1)
H (1)
Attach SHELF SUPPORT (I) by hooking it over
the position tab at the desired height. Make
sure all four SHELF SUPPORTS (I) are at the
same level.
Tilt SHELF (H) diagonally to move it inside
the cabinet. Place SHELF (H) on top of all
four SHELF SUPPORTS (I).
D (1)
4
© 2018 TRINITY - 800.985.5506
H
I
Shelf supports hooked
on position tabs
pivot
cylinder
F
G
B
E
D
C
L
J
position tab