Instructions / Assembly

USAGE INSTRUCTIONS

STACKING CABINETS

You can make a taller cabinet by stacking two

cabinets of the same model.

To store long/tall items, the pre-assembled top

center and bottom center panels can be removed.

Unscrew the center panel from the top of the first

assembled cabinet.

Lay the second assembled cabinet carefully on its

backside. Two people are needed. DO NOT

attempt this alone. Unscrew the center panel and

feet levelers from the bottom.

Carefully set the cabinet upright. Position the

second cabinet on top of the first cabinet. Align

the bottom panel of top cabinet to the top panel

of bottom cabinet. Make sure the bottom frame

of top cabinet sits inside the top frame of bottom

cabinet. Screw CONNECTING BOLTS (O) through

the holes in four corners of the top panel of

bottom cabinet into the pre-installed nuts in four

corners of bottom panel of top cabinet.

Move the stacked cabinet carefully against wall.

There are four small holes on back side of the

cabinet to be used for securing the cabinets to

the wall.

If needed, use a pencil to mark off the fastening

location on the wall through these holes. Drill

holes in marked locations. Insert a ANCHOR (N)

completely into each drilled hole.

Fasten MOUNTING SCREWS (M) through the

holes on cabinet onto the wall or anchors tightly

by a screwdriver.

center panel of

top panel

center panel of

bottom panel

Top Cabinet

Bottom Cabinet