Everything in its place.
PARTS LIST Your TRINITY 48“ Rolling Workbench should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). You will need 10mm wrench (for handles) and 14mm wrench (for casters) for assembly (not included).
ASSEMBLY INSTRUCTIONS STEP 1 Position SIDE HANDLE (B) over pre-installed nuts on the side of WORKBENCH (A). Insert HANDLE BOLTS (C) through the WASHERS (D) first, then the holes on SIDE HANDLE (B). Use a 10mm wrench to tighten HANDLE BOLTS (C) to WORKBENCH (A). A (1) B (2) C (8) D (8) 10mm E (2) F (2) G (16) 14mm Repeat these instructions to install the other SIDE HANDLE (B). STEP 2 Carefully lay WORKBENCH (A) on its backside.
ASSEMBLY INSTRUCTIONS STEP 3 Place the LINERS (H) inside each drawer. H (8) USAGE INSTRUCTIONS COMBINATION LOCK The factory preset combination is 0-0-0-0, even though the Dials may appear with other numbers. Locked Position Dials Knob Reset Position Unlocked Position Alignment Line Before locking the unit, make sure all drawers are fully pushed in and closed.
USAGE INSTRUCTIONS SET NEW COMBINATION 1. Slowly turn the Knob to the Unlocked Position (green dot), leaving the Dials at the preset combination 0-0-0-0. (Fig. A) 2. Slowly turn the Knob clockwise 90 degrees to the Reset Position (white triangle). (Fig. B) Fig. A Fig. B 3. Set your own desired 4-digit combination. (Fig. C) 4. Slowly turn the Knob counter-clockwise 90 degrees back to the Unlocked Position (green dot). Your combination lock is now set with the new combination. (Fig. D) Fig. C Fig.
USAGE INSTRUCTIONS DRAWER REMOVAL Pull the drawer out so that it is almost fully extended. On the RIGHT side, push the black release lever DOWN. On the LEFT side, pull the black release lever UP. While holding the levers as instructed, pull the drawer forward until released from the slides attached to the Workbench (“Workbench Slides”). Note: The slides attached to the drawer (“Drawer Slides”) are an integral part of the drawer and must be removed along with the drawer itself.
SERVICE PARTS LIST – TLSPSB-4803 TRINITY Customer Service provides the following replacement parts: Part Number Description Part Number Description 1) AMA-05-019-1400 14” Drawer Handle 12) XBK-22-001-1416 14” Drawer Liner 2) XBK-23-007-2512 End Cap 13) XBK-22-001-2616 26” Drawer Liner 3) ZSV-01-001-0612 Handle Bolt 14) XBK-22-001-4316 43” Drawer Liner 4) ZSV-01-007-0612 Handle Washer 15) ZSV-99-003-5020 Non-locking Caster 5) PSB-05-009-1500 Side Handle 16) PSB-07-007-4403 44
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY 48” Rolling Workbench. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
9 © 2017 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY 48” ROLLING WORKBENCH Model # TLSPSB-4803 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY 48” Rolling Workbench (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 8:00 AM – 5:00 PM (PST) www.trinityii.