Use and Care Manual

ASSEMBLY INSTRUCTIONS
STEP 1
Two people are recommended for ease of
assembly.
Attach (3) SHELVES (A) to (2) LEGS (B) on
same side using (12) WASHERS (E) and (12)
BOLTS (F) as shown.
Note: The end with a steel plate welded is
the bottom end of leg.
A
Only hand tighten BOLTS (F). Do not
fully tighten until Step 2.
E
B
© 2023 TRINITY - 800.985.5506
2
A (3) B (2) E (12) F (12)
F
STEP 2
Carefully turn over partially assembled unit
from step 1 onto other side. Repeat step 1 to
assemble remaining two legs.
Put assembled cart upside down as shown.
Fully tighten all (24) BOLTS (F) with provided
HEX KEY (G).
B (2) E (12) F (12) G (1)
Steel plate