Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 1

F (4)

E (1)

G (8) H (8)

D (1)

STEP 2

Find WOOD TOP (A) box inside package and place it tape-side up on a

flat smooth surface on the ground. Make sure there is enough space

to open and unfold box.

Open WOOD TOP (A) box carefully keeping WOOD TOP (A) laying face

down inside. Unfold box to use as a work surface.

Place both TOP CROSS BEAMS (B) on WOOD TOP (A). Make sure “L”

brackets at the end of beams are projecting toward wood top edge.

B (2)

A (1)

Lay RIGHT (D) and LEFT (E) SIDE FRAMES on a flat

smooth surface on the ground. Take ADJUSTABLE

LEG (F) and orient insert nuts toward mounting

holes on Side Frames.

Table height can be set between 34” and 40”

height in 2” increments. Select desired height.

Make sure this height adjustment allows for (2)

LARGE BOLTS (G) to be inserted into each Table

leg.

Insert ADJUSABLE LEGS (F) into RIGHT (D) and

LEFT (E) SIDE FRAME leg tube. Make sure all (4)

ADJUSTABLE LEGS (F) heights are identical.

Tighten (2) LARGE BOLTS (F) through (2) LARGE

WASHERS (G) onto each RIGHT (D) and LEFT (E)

SIDE FRAME leg mounting holes.