Installation & Assembly

ASSEMBLY INSTRUCTIONS
4
A
B
C
logo on front side of cabinet
Wood Top
Base Cabinet
Bottom Hole
Top Hole
Wood Top Back Edge
Pre-installed nut on back
corner of base cabinet
Base
Cabinet (1)
A (2)
Wood
Top (1)
B (4)
C (2)
Option 2 (Installed on 1 Base Cabinet)
Move Base Cabinet close to final location where it
will be placed. With 2 people, position a 56”x 19”
WOOD TOP on top of an assembled base cabinet as
shown. Make sure logo on wood top edge is upright
and front facing on cabinet.
Place WOOD TOP BRACKET (A) on back corner of
cabinet. Align bottom hole on WOOD TOP BRACKET
(A) to each pre-installed nut on back corner of
cabinet. Insert CABINET SCREW (C) into each
bottom hole and tighten them fully to cabinet with
a Philips screwdriver.
Insert WOOD SCREW (B) into each top hole and
tighten them fully to wood top edge with a Philips
screwdriver.
Note: 4-piece Set does not include Wall Mounting
Hardware. If you desire set up in this configuration
you will need to buy a Wall Mounting Hardware Kit
(PBK-02-011-0014) which is available for purchase
through our website or our customer service
number.