Installation & Assembly

ManualsBrandsTrinity ManualsGarage & Outdoor Storage & OrganizationCastlerock 8 Piece Garage Cabinet Set

ASSEMBLY INSTRUCTIONS

Base Cabinet (2)

Wood Top (1)

LOGO on front side of cabinet

Base Cabinet

Wood Top

Step 1

Stand two assembled Base Cabinets side by side

as shown and close to final location of where

cabinets will be placed.

With 2 people, position a 84”x 19” WOOD TOP

on top of aligned base cabinets. Make sure logo

on Wood Top edge is upright and front facing on

cabinets.

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS Step 1 Stand two assembled Base Cabinets side by side as shown and close to final location of where cabinets will be placed. Base Cabinet (2) With 2 people, position a 84”x 19” WOOD TOP on top of aligned base cabinets. Make sure logo on Wood Top edge is upright and front facing on cabinets.
PAGE 2
ASSEMBLY INSTRUCTIONS Step 2 Align Wood Top edges to Base Cabinets top edges. Place WOOD TOP BRACKET (A) on back corner of each cabinet. Align bottom hole on WOOD TOP BRACKET (A) to each pre-installed nut on back corner of cabinet. Insert CABINET SCREW (C) into each bottom hole and tighten them fully to cabinet with a Philips screwdriver. A (4) B (8) C (4) Insert WOOD SCREW (B) into each top hole and tighten them fully to wood top edge with a Philips screwdriver.
PAGE 3
ASSEMBLY INSTRUCTIONS Optional Installation with Wood Top Overhang If you want to attach your Wood Top with 2 Base Cabinets next to each other and have overhang of the Wood Top on either side, you will need to buy a Wall Mounting Hardware Kit (PBK-02-011-0014) which is available for purchasing through our website or our customer service number. Base Cabinet (2) Wood Top (1) A (4) B (8) C (4) Move Base Cabinets next to each other and close to final location where it will be placed.
PAGE 4
ASSEMBLY INSTRUCTIONS Optional Installation with Wood Top Overhang Place two WALL BRACKETS (D) to back edge of the overhang Wood Top as shown. Make sure one bracket is as close as possible to end of unsupported end of wood top. Insert WOOD SCREW (B) into each top hole and tighten them fully to Wood Top edge with a Philips screwdriver. B (4) D (2) E (4) F (4) With 2 people, carefully slide assembled unit to wall at desired location. Do NOT lift assembly by wood top.