Installation & Assembly

ASSEMBLY INSTRUCTIONS
5
Optional Installation with Wood Top Overhang
A
If you want to attach your Wood Top with 2 Base
Cabinets next to each other and have overhang of the
Wood Top on either side, you will need to buy a Wall
Mounting Hardware Kit (PBK-02-011-0014) which is
available for purchasing through our website or our
customer service number.
Move Base Cabinets next to each other and close to
final location where it will be placed. With 2 people,
position a 84”x 19” WOOD TOP on top of base
cabinets. Make sure logo on Wood Top edge is upright
and front facing on cabinet.
Place WOOD TOP BRACKET (A) on back corner of each
cabinet. Align bottom hole on WOOD TOP BRACKET (A)
to each pre-installed nut on back corner of each
cabinet. Insert CABINET SCREW (C) into each bottom
hole and tighten them fully to cabinet with a Philips
screwdriver.
Insert WOOD SCREW (B) into each top hole and
tighten them fully to Wood Top edge with a Philips
screwdriver.
B
C
Wood Top
Base Cabinet
Wood Top Back Edge
Pre-installed nut on back
corner of base cabinet
Base
Cabinet (2)
A (4)Wood
Top (1)
B (8) C (4)