OWNER’S MANUAL 28” BASE CABINET W/ DOORS
PARTS LIST Your 28“ Base Cabinet w/Doors should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact Customer Service. Parts can also be requested online. No tools required for assembly.
ASSEMBLY INSTRUCTIONS STEP 1 Lay CABINET BODY (A) gently on its back. Two people are needed, Do NOT attempt this alone. A A (1) D (4) Screw FEET LEVELER (D) fully into each pre-installed nut on four corners of cabinet bottom. Stand cabinet right side up. Move it to desired location. Adjust FEET LEVELER (D) as needed to ensure your cabinet is level and stable. D STEP 2 Attach SHELF SUPPORT (C) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (C) are at the same level.
USAGE INSTRUCTIONS OPEN AND CLOSE DOOR Stopper Plate Lift up door handle to release it from slot on handle base plate, rotate it forward and pull it to open door. Close door by making sure ends of door bar is pushed against the stopper plate both on top and bottom. Rotate the door handle against door and slide into the slot on door handle base plate to keep door closed. Note: To lock the door you need to buy a padlock with shackle diameter no larger than 9/32” (7mm).
SERVICE PARTS LIST Customer Service provides the following replacement parts: Description Description 1) Cabinet Body 9) Shelf Support 2) Door Hinge 10) Handle Screw 3) Right Handle Base Plate 11) Left Handle Base Plate 4) Handle 12) Door Bar Bracket Screw 5) Door Bar 13) Plastic Spacer 6) Door Bar Bracket 14) Door Bar Stopper 7) Feet Leveler 15) Stopper Screw 8) Shelf 15 1 14 13 12 11 2 3 4 10 5 9 6 8 5 7
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a 28” Base Cabinet w/Doors. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form (2) complete the Product Registration Form online or (3) scan and email the form. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY 28” Base Cabinet w/Doors We warrants to the original consumer purchaser (“Purchaser”) of the 28” Base Cabinet w/Doors (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.
OWNER’S MANUAL 28” WALL CABINET
PARTS LIST Your 28” Wall Cabinet should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact Customer Service. Parts can also be requested online You will need a Phillips screwdriver for assembly which is not provided.
ASSEMBLY INSTRUCTIONS STEP 1 Position WALL BRACKET (D) on wall at desired height, making sure it is level. D (1) Mark off mounting location on wall through oval holes on WALL BRACKET (D). If ANCHORS (G) are required, drill holes in marked locations. Insert ANCHOR (G) completely into each drilled hole. F (4) G (4) G Fasten LONG SCREWS (F) through oval holes on WALL BRACKET (D) into wall or anchors tightly with a Phillips screwdriver.
ASSEMBLY INSTRUCTIONS STEP 3 Open cabinet door by lifting up door handle. Attach SHELF SUPPORT (C) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (C) are at same level. door handle B (1) door C (4) A Tilt SHELF (B) diagonally to move it inside cabinet. Place SHELF (B) on top of all four SHELF SUPPORTS (C).
USAGE INSTRUCTIONS OPEN AND CLOSE DOOR Open door by lifting up door handle. Close door by pushing down door handle until it fit inside slot on bottom edge of cabinet body. The door will not stay closed if the handle is not in the slot. Slot on bottom edge of cabinet body Door Handle SHELF ADJUSTMENT Ensure all items have been removed from shelf. To adjust shelf height position, take shelf out of cabinet, re-attach shelf supports to position tabs at desired height.
SERVICE PARTS LIST Customer Service provides the following replacement parts: Description Description 1) Cabinet Body 7) Shelf Support 2) Door 8) Handle Screw 3) Door Hinge 9) Handle Base Plate Screw 4) Gas Lift 10) Handle Base Plate 5) Shelf 11) Handle 6) Wall Mount Hardware Kit 11 1 10 2 9 3 8 4 7 5 6 (x3) (x4) (x4) 6
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a 28” Wall Cabinet. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form (2) complete the Product Registration Form online or (3) scan and email the form. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY 28” Wall Cabinet We warrant to the original consumer purchaser (“Purchaser”) of the 28” Wall Cabinet (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.
OWNER’S MANUAL 36” LOCKER CABINET
PARTS LIST Your 36“ Locker Cabinet should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact Customer Service. Parts can also be requested online. No tools required for assembly.
ASSEMBLY INSTRUCTIONS STEP 1 Lay CABINET BODY (A) gently on its back. Two people are needed, do NOT attempt this alone. Screw FEET LEVELER (D) fully into each pre-installed nut on four corners of cabinet bottom. A (1) D (4) A D Stand cabinet right side up. Move it to desired location. Adjust FEET LEVELER (D) as needed to ensure your cabinet is level and stable. STEP 2 Attach SHELF SUPPORT (C) by hooking it over position tab at desired height. Make sure all four SHELF SUPPORTS (C) are at same level.
USAGE INSTRUCTIONS OPEN AND CLOSE DOOR Stopper Plate Lift up door handle to release it from slot on handle base plate, rotate it forward and pull it to open door. Close door by making sure ends of door bar is pushed against the stopper plate both on top and bottom. Rotate the door handle against door and slide into the slot on door handle base plate to keep door closed. Note: To lock the door you need to buy a padlock with shackle diameter no larger than 9/32” (7mm).
SERVICE PARTS LIST Customer Service provides the following replacement parts: Description 15 14 Description 1) Cabinet Body 9) Shelf Support 2) Door Hinge 10) Handle Screw 3) Right Handle Base Plate 11) Left Handle Base Plate 4) Handle 12) Door Bar Bracket Screw 5) Door Bar Bracket 13) Plastic Spacer 6) Door Bar 14) Door Bar Stopper 7) Feet Leveler 15) Stopper Screw 8) Shelf 1 2 13 3 12 4 11 5 10 6 9 7 8 5
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a 36” Locker Cabinet. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form (2) complete the Product Registration Form online or (3) scan and email the form. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY 36” Locker Cabinet We warrant to the original consumer purchaser (“Purchaser”) of the 36” Locker Cabinet (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.
OWNER’S MANUAL 84” x 19” WOOD TOP
PARTS LIST Your 84“ x 19“ Wood Top can be mounted on top of the Base Cabinet. To install it requires the following parts for assembly which are included in your Base Cabinet hardware package. Please inspect box contents to ensure you have received all components. You will also need ascrewdriver for assembly which is not provided. If you are missing any parts, need assistance with assembly or have questions, please contact Customer Service. Parts can also be requested online.
ASSEMBLY INSTRUCTIONS Step 1 Stand two assembled Base Cabinets side by side as shown and close to final location of where cabinets will be placed. Base Cabinet (2) With 2 people, position a 84”x 19” WOOD TOP on top of aligned base cabinets. Make sure logo on Wood Top edge is upright and front facing on cabinets.
ASSEMBLY INSTRUCTIONS Step 2 Align Wood Top edges to Base Cabinets top edges. Place WOOD TOP BRACKET (A) on back corner of each cabinet. Align bottom hole on WOOD TOP BRACKET (A) to each pre-installed nut on back corner of cabinet. Insert CABINET SCREW (C) into each bottom hole and tighten them fully to cabinet with a Philips screwdriver. A (4) B (8) C (4) Insert WOOD SCREW (B) into each top hole and tighten them fully to wood top edge with a Philips screwdriver.
ASSEMBLY INSTRUCTIONS Optional Installation with Wood Top Overhang If you want to attach your Wood Top with 2 Base Cabinets next to each other and have overhang of the Wood Top on either side, you will need to buy a Wall Mounting Hardware Kit which is available for purchasing through our website or our customer service number. Base Cabinet (2) Wood Top (1) A (4) B (8) C (4) Move Base Cabinets next to each other and close to final location where it will be placed.
ASSEMBLY INSTRUCTIONS Optional Installation with Wood Top Overhang Place two WALL BRACKETS (D) to back edge of the overhang Wood Top as shown. Make sure one bracket is as close as possible to end of unsupported end of wood top. Insert WOOD SCREW (B) into each top hole and tighten them fully to Wood Top edge with a Philips screwdriver. B (4) D (2) E (4) F (4) With 2 people, carefully slide assembled unit to wall at desired location. Do NOT lift assembly by wood top.
SERVICE PARTS LIST Customer Service provides the following replacement parts: Description 1) Wood Screw 2) Cabinet Screw 3) Wood Top Bracket 4) Wall Mounting Hardware Kit 1 (x4) 2 4 (x2) (x4) 3 (x4) 7
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a 84” x 19” Wood Top. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form (2) complete the Product Registration Form online or (3) scan and email the form. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY 84” x 19” Wood Top We warrant to the original consumer purchaser (“Purchaser”) of the 84” x 19” Wood Top (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.
