Owner Manual

ASSEMBLY INSTRUCTIONS
5
Optional Installation with Wood Top Overhang
A
Place WOOD TOP BRACKET (A) on back corner of each
cabinet. Align bottom hole on WOOD TOP BRACKET (A)
to each pre-installed nut on back corner of each
cabinet. Insert CABINET SCREW (C) into each bottom
hole and tighten them fully to cabinet with a Philips
screwdriver.
Insert WOOD SCREW (B) into each top hole and
tighten them fully to Wood Top edge with a Philips
screwdriver.
B
C
Wood Top
Base Cabinet
Wood Top Back Edge
Pre-installed nut on back
corner of base cabinet
Base
Cabinet (2)
A (4)Wood
Top (1)
B (8) C (4)
Move Base Cabinets next to each other and close to
final location where it will be placed. With 2 people,
position a 84”x 19” WOOD TOP on top of base
cabinets. Make sure logo on Wood Top edge is upright
and front facing on cabinet.
If you want to attach your Wood Top with 2 Base
Cabinets next to each other and have overhang of the
Wood Top on either side, you will need to buy a Wall
Mounting Hardware Kit which is available for
purchasing through our website or our customer
service number.