User's Manual

9
1A In-Line fuse
To Receiver
DESCRIPTION – Main Cable
# Important
-These three ground wires have to be all connected together
- Power ground wire from CCR24PNA, Trigger ground wire from CCR24PNA,and Ground
wire of the Recorder GPIO.
Connection with the system
- Power DC12V (Red), Power GND (Black): Power Cables to engine battery.
- Audio Out (RCA Connector) : Connects to “AUDIO IN” port in the back of
recorder.
- Trigger REC (Brown): Connect to GPIO cable.
- Trigger GND (Black): Connect to GPIO black
cable.