User's Manual

User’s Guide
● Read this user’s guide carefully for safe operation and proper
use of the product .
● Features and specifications are subject to change without
notification.
TDSS-2400
2400MHz
Series
WIRELESS TRANSCEIVER SYSTEM
- Connect the battery pack to TX Set and switch the
power ON (located on the bottom of TX unit)
- Install the bracket by using the screws
- Connect the antenna to the RX Set
- Slide RX Set onto the Bracket
- Connect the RJ-45 cable to RX Set
- Prior to use, charge the unit by placing TX set in the
RX set for at least for 8 hours
- Place TX in RX to match ID
- Connect the microphone to TX set
INSTALLATION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE CONDITION THAT
THIS DEVICE DOES NOT CAUSE HARMFUL INTERFERENCE.
NOTE : The manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications
could void the user's authority to operate the
equipment.