User's Manual

User’s Guide
● Read this user’s guide carefully for safe operation and proper
use of the product .
● Features and specifications are subject to change without
notification.
TDSS-900
900MHz Series
WIRELESS TRANSCEIVER SYSTEM
- Connect the battery pack to TX Set and switch the
power ON (located on the bottom of TX unit)
- Install the bracket by using the screws
- Connect the antenna to the RX Set
- Slide RX Set onto the Bracket
- Connect the RJ-45 cable to RX Set
- Prior to use, charge the unit by placing TX set in the
RX set for at least for 5 hours
- Place TX in RX to match ID
- Connect the microphone to TX set
- Once TX and RX matching ID is done and TX leaves from RX,
Transmitter always set to talk with Docking
and are able to send the Audio signal anytime.
INSTALLATION