Installation & Assembly

Step 1
 


 

* 


Step3


5



Step2

Step4





Locate desired position
on wall for hanging.
If wall stud is present,
drill screw(s) directly
into stud, and proceed
to step 4.
If no stud is found,
follow steps 1-4.
Repeat these steps as
needed for multiple
hangers. Be sure holes
are level and spaced
correctly by measuring
the distance between
keyhole slots ( on
center). Check your
markings with a level
before drilling.
Please note, these
instructions are meant
for common drywall
walls. If other conditions
are present, check
with your local
hardware store for
recommendations
on hardware and
hanging methods.
THANK YO
�PURCHASE