User's Manual

Page 8
E Series Data Radio – User Manual
© Copyright 2005 Trio DataCom Pty. Ltd.
Model Number Codes
Part B – E Series Overview
D, E, H, S & M Series Data Radios - Part Number Matrix = Tyxxx-aabbb-cde
T y x x x
- a a b b b - c d e
Options - Base Stations Duplexers*
Options - Hot Standby Configurations*
0 = No Options 0 = No Options
1
= 450MHz Band Rejec
t
Typically Internal [DUPLX450BR]
Duplexer Antenna
3
6
Number Type
Antenna
Config
Antenna Type
7
= 450MHz Band Pass Compact
[DUPLX450BPC]
A - - - Separate Tx & Rx
B - - Dual [x4] Separate Tx & Rx
C Single Internal Single Combined Tx/Rx
Options - E and M Series Remotes*
D Dual [x2] Internal Dual [x2] Combined Tx/Rx
0 E Single External Single Combined Tx/Rx
F Dual [x2] External Dual [x2] Combined Tx/Rx
Options*
0 = No Options
D = Diagnostics - [DIAGS/D, DIAGS/DH, DIAGS/E or DIAGS/EH, DIAGS/M] (D, E & M Series Only)
F = Full Duplex Operation [ERFD450] (ER450 only)
X = Full Duplex Operation and Diagnostics [ERFD450 & DIAGS/E] (ER450 only)
S = SMA Connector (SR450 Remote Only)
RF Channel Data Rate & Bandwidth (Internal Modem
)
D Serie
s
E Serie
s
H Serie
s
A
01 = ACA 4800bps 12.5kHz 001 = 12.5kHz (No Modem Fitted)
A
01
= ACA 4800
#
/ 9600bps 12.5Hz
001 = 2400bps 12.5KHz / 4800bps 25kHz F01 = FCC 115kbps
A
0
2
= ACA 9600bps 25kHz 00
2
= 25kHz (No Modem Fitted)
A
0
2
= ACA 9600
#
/ 19k2bps 25kHz
00
2
= 4800bps 12.5KHz / 9600bps 25kHz
A
01 = ACA 115kbps
F01 = FCC 9600bps 12.5kHz 241 = 2400bps in 12.5kHz [24SR]* F01
= FCC 9600
#
/ 19K2bps 12.5kHz
00
3
= FCC 9600bps 12.5KHz
24
2
= 2400bps in 25kHz [24SR]* F0
2
= FCC 19k2bps 25kHz 00
4
= ETSI 4800bps 12.5KHz
48
2
= 4800bps in 25kHz [48SR]* E01 = ETSI 9600bps 12.5kHz 241* = 2400bps 12.5KHz (S Series [24SR]* Compatible)
E0
2
= ETSI 19k2bps 25kHz 242* = 2400bps 25KHz (S Series [24SR]* Compatible)
482* = 4800bps 25KHz (S Series [48SR]* Compatible)
Frequency (400 MHz Bands
)
Frequency (800 & 900 MHz Band) (D, H & S Series Only
)
M
= 395 to 465MHz (Tx & Rx) (M Series Onl
y
0
7
= (Tx) 847 to 857MHz (Rx) 923 to 933MHz (D Series only, 1W Full Duple
x
H = 450 to 520MHz (Tx & Rx) (M Series Onl
y
0
6
= (Tx) 923 to 933MHz (Rx) 847 to 857MHz (D Series only, 1W Full Duple
x
4
6
= 370 to 388MHz (Tx & Rx
)
9
0
= ISM Unlicensed Band 902 to 928Mh
z
4
7
= 380 to 396MHz (Tx & Rx
)
91 = ISM Unlicensed Band 915 to 928Mhz (Australi
a
4
8
= 395 to 406MHz (Tx & Rx
)
92 = ISM Unlicensed Band 2.4GH
z
5
0
= 403 to 417MHz (Tx & Rx
)
5
8
= (Tx) 406 to 421MHz (Rx) 415 to 430MH
z
5
9
= (Tx) 415 to 430MHz (Rx) 406 to 421MH
z
5
6
= 418 to 435MHz (Tx & Rx
)
57 = 428 to 444MHz (Tx & Rx) Note: Other frequency bands available upon request.
55 = 436 to 450MHz (Tx & Rx)
51 = 450 to 465MHz (Tx & Rx)
52 = 465 to 480MHz (Tx & Rx)
53 = 480 to 494MHz (Tx & Rx)
60 = 490 to 500MHz (Tx & Rx)
54 = 505 to 518MHz (Tx & Rx)
27 = (Tx) 511 to 515MHz (Rx) 501 to 505MHz
Generic Frequency Band
NOTES:
240 = ISM 2.4GHz (H Series only) * Additional charges apply. Must be ordered separately. Please refer to price list.
450 = 370 to 518MHz (E, M & S Series only)
#
Provides compatibility with D Series radio
900 = 800 / 900MHz (D & H Series only) [ ] Items in [ ] parenthesis refer to actual Trio part numbers
** Consult factory for availability.
Unit Type
~~ M Series Compatible EB/EH450 Base Stations are Type A01 or F01
R = Remote Station
B = Base / Repeater Station (D, E & M Series Only) Standards: ACA - Australian Communications Authority
H = Hot Standby Base / Repeater (D, E & M Series Only) FCC - Federal Communications Commission
ETSI - European Telecommunication Standards Institute
Model Type
D = D Series Family
E
= E Serie
s
Famil
y
H = H Series Family
M = M Series Family
S
= S Series Famil
y
Example:
E R 4 5 0 - 5 1 A 0 2 - D H 0
Version: 5/05
= 450MHz Band Pass Cavity [DUPLX450BP]
= 900MHz Band Pass (76MHz split)[DUPLX852/930]
The example shown specifies: E Series, Remote Radio, generic 450MHz band, with a specific frequency of
450MHz to 465MHz, a 9600/19200bps modem, with a bandwidth of 25kHz, diagnostics and Class 1, Div 2
Hazardous Approval (standard).
Note: Specify Internally or Externally fitted. Externally fitted
duplexers require feeder tails.
M Series~
~
S Serie
s
= No Options
= Hazardous Environment Class 1, Div 2 and Diagnostics
Standard on E Series, Option on M Series [HAZ-APROVAL/M]
H