User's Manual

Page 6
E Series Ethernet Radio – User Manual
Part B – E Series Ethernet Overview
Denition of E Series Ethernet
Radio
The E Series Ethernet radios are a range of wireless modems
designed for the transmission of data/Ethernet communications
for SCADA, telemetry and any other information and control
applications that utilise ASCII messaging techniques. The E
Series Ethernet radios use advanced “digital” modulation and
signal processing techniques to achieve exceptionally high data
throughput efciency using traditional licensed narrow band radio
channels.
These products are available in many frequency band and
regulatory formats, to suit spectrum bandplans, in various
continental regions. The range is designed for both xed point
to point (PTP), and multiple address (MAS) or point to multipoint
(PTMP) systems.
E Series Ethernet Product Range
The E Series Ethernet product range consists of the basic half
duplex “Remote” radio modem, an extended feature full duplex
Remote radio modem, and ruggedised Base Station variants,
including an optional Hot Standby controller to control two base
station units in a redundant conguration.
Part B – E Series Overview
Features
Ethernet
- Data ltering providing a facility for the smart repeating of
Ethernet packets
- Support for smart peer to peer communications
- Filtering of broadcast packets to minimise unnecessary
usage of the narrow band channel.
- Supports access to diagnostics via SNMP and eDiags
(using TVIEW+ Software).
- Telnet interface for Ethernet access to programming and
diagnostics.
- Legacy RS-232 serial support via embedded terminal
server (UDP/TCP).
- Radius authentication
Network Management and Remote
Diagnostics (In conjunction with TVIEW+™ Software)
- Remote fully transparent Network Management and
Diagnostics
- Network wide operation from any radio modem
- Full SCADA style features such as database, trending and
networking
- Over-the-air modem reconguration
- Full graphical presentation (HMI)
Data Ports
- Independent Serial & Ethernet ports
- Compatible with most industry standard data protocols:
Ethernet/IP (including UDP,TCP, DHCP, ARP, ICMP, STP,
IGMP, SNTP & TFTP)
- Selectable 300 -38.4 Kbps asynchronous RS-232 interface
- MultiStream™ simultaneous data streams allow for multiple
vendor devices/protocols to be transported on the one radio
network
- Internal repeater operation - single radio store and forward
- ChannelShare™ unique integrated C/DSMA collision
avoidance technology permits simultaneous polling and
spontaneous alarm reporting operation in the same system
ER45e Remote Radio
EB45e Base / Repeater Station
EH45e Hot Standby Base Station