User's Manual

Page 24

M Series Data Radio – User Manual

Part E – Getting Started - MR450

MR450 Connections Layout

Connecting Antennas and RF Feeders

The RF antenna system should be installed in accordance with the

manufacturers notes.

The RF connector used on the M Series radios are N Type female

connectors. Always use good quality low loss feeder cable, selected

according to the length of the cable run. Ensure all external

connections are waterproofed using amalgamating tape.

Preset directional antennas in the required direction using a compass,

GPS, or visual alignment and ensure correct polarisation (vertical or

horizontal).

Communications Ports

The TVIEW+ M Series User & Configuration / Diagnostics Cable is a

DB9 (Male) to two DB9 (Females) patch cable. It provides a

connection for user data and configuration / diagnostics. It is intended

for RS232 serial communications.

TVIEW+ M Series Cable Configuration: