User's Manual

ManualsBrandsTrio Datacom ManualsElectronicsFM Radio Modem

Page 4

M Series Data Radio – User Manual

Warranty

All equipment supplied by Trio DataCom Pty Ltd is covered by

warranty for faulty workmanship and parts for a period of twelve (12)

months from the date of delivery to the customer. During the warranty

period Trio DataCom Pty Ltd shall, at its option, repair or replace faulty

parts or equipment provided the fault has not been caused by misuse,

accident, deliberate damage, abnormal atmosphere, liquid immersion

or lightning discharge; or where attempts have been made by

unauthorised persons to repair or modify the equipment.

The warranty does not cover modifications to software. All equipment

for repair under warranty must be returned freight paid to Trio DataCom

Pty Ltd or to such other place as Trio DataCom Pty Ltd shall

nominate. Following repair or replacement the equipment shall be

returned to the customer freight forward. If it is not possible due to the

nature of the equipment for it to be returned to Trio DataCom Pty Ltd,

then such expenses as may be incurred by Trio DataCom Pty Ltd in

servicing the equipment in situ shall be chargeable to the customer.

When equipment for repair does not qualify for repair or replacement

under warranty, repairs shall be performed at the prevailing costs for

parts and labour. Under no circumstances shall Trio DataCom Pty

Ltd’s liability extend beyond the above nor shall Trio DataCom Pty

Ltd, its principals, servants or agents be liable for the consequential

damages caused by the failure or malfunction of any equipment.

Important Notice

This manual covers the operation of the M Series of Digital Data

Radios. Specifications described are typical only and are subject to

normal manufacturing and service tolerances.

Trio DataCom Pty Ltd reserves the right to modify the equipment, its

specification or this manual without prior notice, in the interest of

improving performance, reliability or servicing. At the time of

publication all data is correct for the operation of the equipment at the

voltage and/or temperature referred to. Performance data indicates

typical values related to the particular product.

This manual is copyright by Trio DataCom Pty Ltd. All rights

reserved. No part of the documentation or the information supplied

may be divulged to any third party without the express written

permission of Trio DataCom Pty Ltd.

Same are proprietary to Trio DataCom Pty Ltd and are supplied for the

purposes referred to in the accompanying documentation and must not

be used for any other purpose. All such information remains the

property of Trio DataCom Pty Ltd and may not be reproduced, copied,

stored on or transferred to any other media or used or distributed in

any way save for the express purposes for which it is supplied.

Products offered may contain software which is proprietary to Trio

DataCom Pty Ltd. However, the offer of supply of these products and

services does not include or infer any transfer of ownership of such

proprietary information and as such reproduction or reuse without the

express permission in writing from Trio DataCom Pty Ltd is forbidden.

Permission may be applied for by contacting Trio DataCom Pty Ltd in

writing.

Part A - Preface

Part A – Preface

Warning - RF Exposure (FCC/IC)

The radio equipment described in this user manual emits low level

radio frequency energy. Professional installation is required. The

concentrated energy may pose a health hazard depending on the type

of antenna used.

This device is intended for FIXED installation conditions. DO NOT

allow people to come within 2 metres (6.6 feet) of non-directional

antennas and 6 metres (20 feet) from the front of directional antennas

when the transmitter is operating.

More information is available from www.fcc.gov/oet/info/documents/

bulletins