User's Manual

ManualsBrandsTrio Datacom ManualsElectronicsUHF Base Station (Data)

100

Document Number: 0100SM1401 Issue: 10-14

Summary of SNMP MIB Objects Supported

Object name Object Identifier (OID) Syntax Object description

General Group:

serialNumber .1.3.6.1.4.1.33302.30.1.1.0 String Serial number of the Q data radio

modelNumber .1.3.6.1.4.1.33302.30.1.2.0 String Model number of the Q data radio

hardwareRevision .1.3.6.1.4.1.33302.30.1.3.0 String Hardware revision of the Q data radio

firmwareRevision .1.3.6.1.4.1.33302.30.1.5.0 String The firmware revision the Q data radio

date .1.3.6.1.4.1.33302.30.1.6.0 String The date as reported by the Q data radio

time .1.3.6.1.4.1.33302.30.1.7.0 String The time as reported by the Q data radio

utcTimeOffset .1.3.6.1.4.1.33302.30.1.8.0 String Time offset from UTC for the Q data radio’s

local time zone

upTime .1.3.6.1.4.1.33302.30.1.9.0 String The uptime of the Q data radio

primaryNtpServer .1.3.6.1.4.1.33302.30.1.10.0 String Primary Network Time Protocol (NTP) domain

name

cpuLoad .1.3.6.1.4.1.33302.30.1.11.0 Integer Average CPU utilisation (%) for the past 15

minutes

supplyVoltage .1.3.6.1.4.1.33302.30.1.12.0 Integer Supply Voltage of the Q data radio in mV

temperatureC .1.3.6.1.4.1.33302.30.1.13.1.3.1 Integer The internal temperature of the Q data radio

(degrees C)

temperatureF .1.3.6.1.4.1.33302.30.1.13.1.4.1 Integer The internal temperature of the Q data radio

(degrees F)

ipAddress .1.3.6.1.4.1.33302.30.1.15.0 String The IP address of the Q data radio.

Radio Group:

radioReceivedPackets .1.3.6.1.4.1.33302.30.2.3.0 Integer Number of packets received from over the

radio link

radioTrasnmittedPackets .1.3.6.1.4.1.33302.30.2.4.0 Integer Number of packets transmitted over the radio

link

radioForwardPower .1.3.6.1.4.1.33302.30.2.5.1.2.1 Integer Level of transmit power (dBm)

radioReversePower .1.3.6.1.4.1.33302.30.2.6.1.2.1 Integer Level of reverse power (dBm)

radioVswr .1.3.6.1.4.1.33302.30.2.7.1.2.1 Integer VSWR

radioRssiValue .1.3.6.1.4.1.33302.30.2.8.1.2.1 Integer Radio RSSI value (dBm)

radioDataRate .1.3.6.1.4.1.33302.30.2.15.0 Integer The over-the-air data rate of the Q data radio.

[Dynamic(0), 8000bps(1), 14000bps(2),

16000bps(3), 24000bps(4), 28000bps(5),

32000bps(6), 42000bps(7), 56000bps(8)]

txFrequency .1.3.6.1.4.1.33302.30.2.18.0 Integer Radio’s transmit frequency (Hz).

rxFrequency .1.3.6.1.4.1.33302.30.2.19.0 Integer Radio’s receive frequency (Hz).

muteThreshold .1.3.6.1.4.1.33302.30.2.20.0 Integer Radio’s mute threshold (dBm).

rxGoodFrameCount .1.3.6.1.4.1.33302.30.2.23.0 Integer Good frames received.

rxGoodByteCount .1.3.6.1.4.1.33302.30.2.24.0 Integer Good bytes received.

rxBadFrameCount .1.3.6.1.4.1.33302.30.2.25.0 Integer Bad frames received.

rxAverageGoodFrameSize .1.3.6.1.4.1.33302.30.2.26.0 Integer Average received good frame size.

rxAverageFrameRate .1.3.6.1.4.1.33302.30.2.27.0 Integer Average receive frame rate.

rxChannelOccupancy .1.3.6.1.4.1.33302.30.2.28.0 Integer Receive channel occupancy.

rxSlidingChannelOccupancy .1.3.6.1.4.1.33302.30.2.29.0 Integer Sliding channel occupancy.

txByteCount .1.3.6.1.4.1.33302.30.2.31.0 Integer Transmitted byte counter.

txFrameCount .1.3.6.1.4.1.33302.30.2.32.0 Integer Transmit frame count.

txAverageFrameSize .1.3.6.1.4.1.33302.30.2.33.0 Integer Transmit average frame size.

txAverageFrameRate .1.3.6.1.4.1.33302.30.2.34.0 Integer Transmit average frame rate.

radioFrequencyError .1.3.6.1.4.1.33302.30.2.36.0 Integer Radio frequency error (Hz).

Part H – Advanced