Thermoelectric Wine Cooler Model No: TCCV12B/TCCV18B/TCCV28B/TCCV24B2Z USER MANUAL -1-
TABLE OF CONTENTS I. GENERAL SAFETY PRECAUTIONS -1- II. TECHNICAL DATA -3- III. STRUCTURAL DIAGRAM -3- IV. ELECTRICAL PARTS -4- V. OPERATION OF WINE COOLER -5- VI. SPECIFIC PRECAUTIONS -5- VII. MAINTENANCE -6- VIII. RECOMMENDED TEMPERATURE SETTINGS -6- IX.
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY! Please read these instructions carefully before using this product and save this manual for future reference. I. GENERAL SAFETY PRECAUTIONS • After removing the wine cooler from packaging, ensure it is not damaged. If you have any doubts, do not use it and contact an authorised service centre. • Packaging and installation tools should be kept out of reach of children. Read the operating manual carefully before use.
rear of the appliance. IMPORTANT SAFETY INSTRUCTIONS • Improper use of the grounded plug can result in electrical shock. If the power cord is damaged, have it replaced by an authorised service centre. • This wine cooler should be placed an level ground for your safety. • Do not under any circumstances alter the power cord supplied. • The cord should be secured behind the wine cooler and not left exposed or dangling to prevent accidental injury. • Never unplug the wine cooler by pulling the power cord.
II. TECHNICAL DATA Reference: TCCV12B/TCCV18B/TCCV28B TCCV24B2Z Rated voltage: AC 220~240V AC 220~240V Ampere: 0.55A 1.
1.LIGHT 5.HINGE 2.ALUMINUM RACK 6.MAGNETIC SEAL 9.Light button 12.Set temp. up button 3.SHELF TRIM 7.HANDLE 10.Celsius/Fahrenheit button 13.Set temp. down button IV. ELECTRICAL PARTS -4- 4.FOOT 8.DOOR 11.
V. OPERATION OF WINE COOLER • The internal temperature of this thermoelectric wine cooler depends on the room temperature. The wine cooler can be adjusted in the range 11–18°C (±1°C) when it is located in an ideal room temperature of 25°C. • When first turned on, with no objects placed inside it, the wine cooler will reach the temperature programmed after 2-2.5 hours. • When the power is connected, the cooling system starts to work. • The temp. you want can be set by touching ▲ and ▼ with your finger.
• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance. • If the wine cooler is left empty for long periods, switch off, clean, dry, and leave the door open to prevent mould developing within the appliance. VII. MAINTENANCE • Shut off the power supply before cleaning the interior. • Take out all bottles, and the shelves, then clean the interior with water containing bi-card soda first, then wipe again with clean water.
IX. TROUBLESHOOTING Issues Possible Cause No cooling. Temperature inside not low enough. Solutions Not plugged in. Plug in. Low voltage. Ensure correct voltage. Fuse broken. Change fuse. The wine cooler is placed too near a heat source. Keep the wine cooler away from sunlight and other heat sources. Bad ventilation. Place the wine cooler in an area with good ventilation and keep things away from the fans.
