Product Description

Tripleplus Ltd. | 5 Hamada St., High Tech Park, Yoqneam, 2069200, Israel | [phone] | [e-mail] | www.tripleplus.io
Triple+ CLM
™
Repeater Installer Guide v3.0
P/N: CLM-RNAMAP-3-00, CLM-RNEMEA-4-00, CLM-RNAMAP-3-02
 Welcome
Thank you for choosing Triple+ CLM™.
Triple+ CLM™ is the ultimate IoT cloud-based system for home safety. The
system is managed via an App and is designed to prevent damage due to
water leakage. Triple+ offers you a total peace of mind at home or away.
 Please note
Please read these instructions carefully and follow the system's installation
and commissioning steps.
Maintain this document in a safe place for future reference. Contact your
authorized installer with any questions.
Warning! This product was designed to prevent water leakage damages
and should be used for this purpose only.
 Triple+ CLM™ system
Triple+ CLM™ line of products includes innovative battery-operated devices
which enables the automated control of water valves. This is unified under
the “Smart Home” umbrella. The Triple+ CLM™ HUB serves as a Gateway
that ensures a secured communication between the system devices, Triple+
cloud and App.
Triple+ CLM™ integrates easily into the Smart Home IoT ecosystem,
providing a unique cloud-based secured platform for Water Leak
Management.
 Repeater specification
Part No.
CLM-RNAMAP-3-00, CLM-RNEMEA-3-00, CLM-
RNAMAP-3-02
Product description
The wireless repeater is used to extend the
communication range between the system devices
and the HUB. Generally, the repeater is used when
the signal between the devices and the HUB is too
weak.
Dimensions
5.9x8.0x2.5cm (2.32x3.15x0.98'')
Weight
110gr (3.8 Oz)
Power supply
External Adaptor Input 110-240 V AC
Operation voltage
5V (2 X AAA back up batteries included Up to two
hours)
Operating RF
868/915 MHz
Transmission range
Open space - up to 230 m (750 ft.)
In enclosed space - up to 120 m (390 ft.)
Avoid installing in a metal cabinet.
Working temperature
-20 to +500C (-4 to +1220F)
Certifications
FCC ID: 2AFOIRPT
IC: 20798-RPT

 Backup Batteries Installation
1. Slide down the batteries case cover.
2. Insert 2 x AAA batteries (included).
3. Slide back up the batteries case cover.
 Repeater description
A. Power cable.
B. LED indicator
 Repeater installation Steps
1. Locate the best location for installation.
2. Use screws or the double-sided adhesive tape to mount the back cover
of the Repeater to the wall
 Repeater LED behavior
 GREEN flashes every 30 seconds – OK
 BLUE flashes every 30 seconds – communication problems
 RED flashes every 30 seconds – low battery
 System component synchronization and activation
Triple+ CLM™ devices are installed and activated using the Triple+ CLM™
installer’s or End-User APP available on AppStore and Google Play. It is
recommended to test the unit before installation.
This Repeater is designed for indoor use only and should be installed by an
authorized installer.
Warranty instructions
Please visit www.tripleplus.io/support for warranty, technical
support, terms and conditions or troubleshooting
PW0000
109
B
A