Manual

Page 2
SAFETY RULES
Warning
This Tester has been designed with your safety in mind. However,
no design can completely protect against incorrect use. Electrical
circuits can be dangerous and/or lethal when lack of caution or poor
safety practices are used.
Read the Manual
Read this Instruction Manual carefully and completely. Voltages and
currents within the capability of this test equipment can be hazard-
ous. Follow the instructions in this manual for every measurement.
Read and understand the general instructions before attempting to
use this tester. Do not exceed the limits of the tester.
Safety Check
Double check the switch setting and lead connections before mak-
ing measurements. Are you following all of the instructions? Dis-
connect the tester or turn off the power before changing switch
positions. Do not connect to circuits with voltage present when
switch is in any ohms or current position. When replacing fuses, use
only specified type fuses and insert in correct fuse holder.