User Manual

10 CamView HD Pro User Manual
www.Triplett.com
4. HOW TO USE YOUR CAMVIEW HD PRO
4.1 Main Menu
When the CamView HD Pro first boots up, you will see the following Main Screen.
You can navigate this screen using the Up or Down Arrow Keys. Once you have highlighted the
function you want to use, press the Right Arrow Key to go to the Interface Screen for that feature.
4.2 Testing Analog Cameras
4.2.1 Overview
You can test Standard Definition Analog (NTSC/PAL) and High Definition (HD) Analog cameras
that use up to AHD 2.0, HD-TVI 3.0, or HD-CVI 3.0 encoding.
4.2.2 How to Connect the Analog Camera to the Tester
Analog cameras are connected using the BNC Video In connector on the top of the Tester (see
Page 6, #27 on the diagram). If the camera is already providing a live-feed to the security person-
nel and you don’t want to remove their feed while you are testing the camera, you can then use the
BNC Video Out (see Page 6, #26 on the diagram) to set up the Tester in series.
If the camera has PTZ, plug the PTZ cable into the RS485 Port on the side of the Tester then use
the alligator clips on the RS485 cable to connect to the camera’s RS485 leads, red to positive (+)
and black to negative (-).