User Manual

Caution when connecting

The Real World Certiﬁ er has two RJ45 jacks ("LEFT","RIGHT"). The

LEFT jack is for testing cables (the

jack is not protected from voltages).

The RIGHT jack is for testing switches

(it is protected from PoE voltage).

Protect the RWC from telephone and

Power over Ethernet (PoE) voltages

by using the "RIGHT" socket when

connecting to these devices and when toning.

Limited Warranty

The manufacturer warrants to the original consumer that this product

is in good working order for a period of one year from the date of

manufacture or date of purchase. During this period the product will

be repaired or replaced without charge for either parts or labor. The

warranty does not cover damage caused by improper use or abuse

including connecting to high voltage. Repair or replacement as provided

under this warranty is the exclusive remedy of the purchaser.

Metric version available with display and reports in metric units.

Real World Certiﬁ er and Real World Certiﬁ cation are trademarks of Byte Brothers.

Microsoft and Excel are registered trademarks of the Microsoft Corporation.

Help with device installation and PoE

Installers of VoIP phones, IP cameras or access

points use the Power Panel for exact measurements

of PoE voltage and power usage, displaying the

presence of 10,100,1000 switches and the pair

location of each. Note: "PoE" (Power over Ethernet)

powers devices over the CAT5/6 cable. Please visit

www.bytebrothers.com for data and videos.

USE <LEFT> PLUG

TO TEST CABLES

USE <RIGHT> PLUG

TO TEST PORTS