User Manual

CAT 5/6 UTP Cable Testing / RW CERTIFY / REVIEW

CAT 5/6 UTP

12> 203' = = = <12

36> 203' = = = <36

45> 201' = = = <45

MENU REVIEW

78> 200' = = = <78

Wire Map

A correct wire map

for a straight through

cable.

WIRE MAP: The wire map displays the pairing of the wires in the

cable. The example wire map indicates that the ﬁ rst pair (comprised

of pins 1 and 2) is 203 feet long and terminates in pins 1 and 2 on

the far end of the cable.

speciﬁ cations at a given speed. One percent is barely passing. 100

percent is maximum tolerance.

Tolerance is largely cable length driven. The longer the cable is, the

less the tolerance. However, lower Category cables eat up tolerance

faster than higher Category cables.

If Tolerance is below 15%, you may wish to consider using a

repeater, hub or switch to shorten the cable run. This is especially

true if you are in a "noisy" environment (large electromechanical

machines, etc.).