User Manual

CAT 5/6 UTP Cable Testing / BASIC TEST UTP
RW CERTIFY UTP
BASIC TEST UTP
TRACE TONES ON
EXIT SCROLL SEL
UTP Cable Test
Main Menu
30
BASIC TESTING OF UTP
Test UTP for opens, short,
split pairs, length and
distance to fault.
BASIC TEST UTP: Move the cursor to BASIC TEST and press SELECT
to test a UTP cable for length, opens, shorts, split pairs (plus distance to
these faults) and wire map. BASIC TEST UTP is a quick test and does
not perform Real World Certifi cation. Basic test results can be stored
in Printer Memory. Note: BASIC TEST UTP is often used when a cable
fails to pass the RWC test. Or it is used to test 2 pair UTP wiring (RWC
can only be performed on 4 pair wire).
UN-COIL CABLE
PLUG OPEN CABLE
INTO LEFT PLUG
DO NOT USE PROBE
EXIT TEST
Press down arrow
button after the
UTP cable is
connected
Follow the instructions on the screen (plug the cable you wish to test
into the LEFT jack). Only an uncoiled cable will give you the most
CAT 5/6 UTP