User Manual

Press SAVE to either SAVE or NAME and SAVE the test. See

page 35 for instructions. Press EXIT to discard the results.

CAT 5/6 UTP Cable Testing / BASIC TEST UTP

12> 203' = = = <12

36> 203' = = = <36

45> 201' = = = <45

EXIT SAVE

78> 200' = = = <78

UTP Wire Map

A correct wire map

for a straight through

UTP cable.

UTP WIRE MAP: The wire map displays the pairing of the wires.

The map above indicates that the ﬁ rst pair ("12>"), pins 1 and 2, is

203 feet long and terminates in pins 1 and 2 ("<12") on the far end

of the cable. If there were any problems, they would be displayed.

CAT 5/6 UTP

12> 203'

36> 203'

45> 201'

78> 200'

EXIT MAP + TRACE

UTP pairs and length

are displayed. Select

MAP + TRACE for wire-

map and tones

LEDs

Remote Probe LEDs. The Remote Probe

needs to be connected only for a brief period.

Flashing LED(s) indicate the test is progressing.

A steady LED indicates the test is completed.

This saves you an extra trip to retrieve the

probe. If LED(s) continue to ﬂ ash the cable,

the cable has a wiring problem. Disconnect

the probe and go to the Main Unit to see the

see the results.