User Manual

EDIT NAME

NAMING / SAVING TEST RESULTS

EXIT SCROLL SEL

REVIEW TEST

SAVE READING

RWC TEST PORT

EDIT TEST NAME

All RWC1000 tests, whether RWC UTP, Basic UTP or coax, eventually

arr

ive at this screen. It is here where you decide to SAVE the test in

PRINTER MEMORY (with or without a custom NAME).

REVIEW TEST: Review test results before they are SAVED. After

reviewing the test results you can return to this screen.

SAVE READINGS: Store the results from the latest test in PRINTER

MEMORY for later printing. The next sequential Reading Number

(1-250) is automatically assigned along with any NAME that you

created (see EDIT TEST NAME below). Creating a name is not

required. Note: The test results of all RWC1000 cable tests can

be NAMED and STORED with the exception of RWC tests that

did not "PASS".

RWC TEST PORT: For RWC UTP tests only. See page 18.

EDIT TEST NAME: Create a name (not required) that is stored

with the sequential reading number. If you are going to create a

name, it must be created before the test is SAVED. See the fol-

lowing page for instructions on creating a NAME.

EXIT: Discards the test results and returns to the Main Menu.

Naming and Saving

test results start at

this screen