User Manual

EDIT NAME

NAMING / SAVING TEST RESULTS

To NAME a reading, you must ﬁ rst complete any of the RWC1000's

cable tests. At the end of the test, press the DOWN arrow (labeled

"REVIEW/SAVE" or "SAVE") and the above screen appears. Select

EDIT TEST NAME.

For the purposes of learning the naming routine, select START

FRESH and follow the exercises on the following page. Once you

become proﬁ cient with START FRESH, give the EDIT OLD routine a

try. It speeds creating names by allowing you to copy an "old" reading

name as the starting point for creating the next cable reading name.

See 2 pages ahead for more detail.

EXIT SCROLL SEL

REVIEW TEST

SAVE READING

RWC TEST PORT

EDIT TEST NAME

Select EDIT TEST NAME

to create a custom name

for the test results. Do

this before saving the

test in memory.

EXIT SCROLL SEL

CREATE TEST NAME

START FRESH

EDIT OLD NAME

Select START FRESH

to create a name from

scratch. Select EDIT OLD

to create a new name by

modifying the prior name.

It saves time.

Note: Creating a name (EDIT TEST NAME) for a test result is optional.

The RWC1000 automatically assigns a sequential number from 1 to 250

when SAVE READING is selected. If a name has been created using

EDIT TEST name, this name will also be stored with the sequential

number when SAVE READING is selected.