User Manual

40
MEMORY
REVIEW MEMORY
ERASE MEMORY
EXIT SCROLL SEL
READING # 1
BLANK TEST NAME
UP DOWN SEL
REVIEW: Use the UP and DOWN
arrow to fi nd the reading you wish
to review in Printer Memory. Press
SEL to review. "BLANK TEST
NAME" indicates a name has not
been created for the test.
ERASE: Selecting the ERASE
function erases all of Printer
Memory. There is no way to selec-
tively erase readings. This screen
verifi es that you wish to erase all
of Printer Memory.
REVIEWING PRINTER MEMORY
ERASE READINGS
ERASE ALL MEMORY
NO> NOT SURE
YES> VERY SURE
EXIT SCROLL SEL
FLASH MEMORY: The test readings are stored in nonvolatile (fl ash)
memory. The stored readings will remain until the "ERASE" function
is performed. Powering OFF the tester or unplugging its battery will
not affect the memory contents.
UNDERSTANDING THE READINGS: The display of the stored readings
follows the same sequence as if you reviewed the
test immediately after the test was conducted. See page 21.
Review or Erase
selection screen