User Manual

USB port

USB micro B

plug

PC with Excel

and a USB port

RWC1000 with up to 250

stored readings

PRINTING FROM A PC

STEP 1: INSTALL THE RWC DRIVER ON PC: Run "install_driver.

exe" (found on the RWC software CD). This driver is needed for the

PC to talk to the RWC (ignore other drivers). The RWC does not

need to be connected to the PC for the driver to properly install.

STEP 2: TRANSFERRING TEST READINGS (RWC TO PC):

1) Connect the RWC to a USB port on your PC and turn the RWC ON.

2) Run the "RWC1000.xls" spreadsheet (found on the RWC software

CD). RWC1000.xls is itself an Excel spreadsheet that uses Excel's

built-in macros to transfer the test results to your PC. Run RWC1000.xls

directly from the CD or copy it to your hard drive. Follow the directions

on the Excel screen to transfer the readings from the RWC's Printer

Memory. 3) If you wish, print some or all of the tests (each test prints

on a separate sheet). Or email the ﬁ le to your customer as proof of

test. 4) Save the ﬁ le using Excel's File>"Save as". See the Readme.

doc ﬁ le on the RWC software CD for more details.

Transfer the test readings from the Main Unit

to the PC using the supplied cable, driver and

software (requires Microsoft

Excel

)

PRINTING