User Manual

ManualsBrandsTriplett ManualsElectricalTriplett / Byte Brothers RWC1000K2(CS) CAT5 CAT5e CAT6 Cable Verifier with Printable Reports

Press the Import Readings button

next. It downloads data from the serial port speci-

ﬁ ed in the drop down box. Press OK.

PRINTING FROM A PC

Microsoft Excel

Download from network

tester successful!

Error messages: If Excel says "Please select a serial port with

a network tester connected" or "No network testers found", com-

munication is not established with the RWC's USB port. First check

the connections; is the USB cable ﬁ rmly connected; is Excel's macro

security set to low; and the RWC powered ON. For more help, see

README.DOC on the RWC software CD and the videos at www.

bytebros.com/bb_tester/tech_support/RWC1000_tech_support.htm. It

shows you the step-by-step installation procedure.

After the readings are

downloaded, press to

launch the spreadsheet.

If you wish to change

any NAMES that you

created, do it in this

opening screen. You can

wait until they are in the

spreadsheet but it is

quicker here.

Edit Report

Import Readings

PRINTING

Edit Report

Readings

Finish

Back

Select and change reading names below:

Rack 5 Jack 3

Rack 5 Jack 4

Rack 5 Jack 5

Room 18 Jack 1

Room 18 Jack 2

Room 18 Jack 2A

Room 18 Jack 2B

Reading #: Reading Name:

Room 18 Jack 1

The sequential number (1-250) automatically assigned by the

RWC1000 to each stored test will appear as "Reading: Cable#1,

Reading: Cable#2", etc. in the spreadsheet along with any custom

name that you created. The "Reading #" can only be modiﬁ ed in the

spreadsheet. Note: The RWC1000 allows duplicate custom names

but when they are printed in Excel they will appear as "Jack A",

"Jack A (2)", "Jack A (3)", etc. unless you change the name here.