User Guide

USER GUIDE
10
Figure 5 Smart IP Access connections to a KVM switch
10. Default IP address
Smart IP Access has two available Ethernet Adapters, LAN 1 and LAN 2:
 By default, LAN 1 boots with an automatically assigned IP address if a
DHCP (Dynamic Host Configuration Protocol) server exists. The MAC
address appears on a label on the underside of the IP Access box. Also on
the label is the 6-digit device number (D.N.). The default device name is
the letter ‘D’ followed by the device number
 LAN 2 boots with the default IP configuration:
IP Address - 192.168.0.155
Subnet mask - 255.255.255.0
You can use the default Smart IP Access IP address if your computer resides on the
same subnet where Smart IP Access is installed, or you can connect a Crossover
LAN connector cable to the Smart IP Access on one end, and to the Ethernet
adapter of your computer at the other end.
Computer rack
ProLiant DL360
9.1- GB
10k
ULTRA2 SCSI
9.1- GB
10k
ULTRA2 SCSI
ProLiant DL360
9.1- GB
10k
ULTRA2 SCSI
9.1- GB
10k
ULTRA2 SCSI
ProLiant DL360
9.1- GB
10k
ULTRA2 SCSI
9.1- GB
10k
ULTRA2 SCSI
ProLiant DL360
9.1- GB
10k
ULTRA2 SCSI
9.1- GB
10k
ULTRA2 SCSI
ProLiant DL360
9.1- GB
10k
ULTRA2 SCSI
9.1- GB
10k
ULTRA2 SCSI
ProLiant DL360
9.1- GB
10k
ULTRA2 SCSI
9.1- GB
10k
ULTRA2 SCSI
COMPUTER 1 COMPUTER 2
COMPUTER 6COMPUTER 5STATION 2
SCREENPS/2 MOUSEKB
POWER
SERIAL MOUSE
COMPUTER 3 COMPUTER 4
COMPUTER 8COMPUTER 7
KVM switch
3 in 1 CPU cable
POWER
100-240 VAC 50/60 Hz
www.minicom.com
CONSOLE COMPUTER
2 2
11
L
A
N
S
E
R
I
A
L
User over IP
hp1 9 2 5
Au t o 1 2
LAN / WAN