User Guide

SMART IP ACCESS
17
Figure 10 Switch configuration
1. Choose the manufacturer and model of the connected KVM switch. The number
of possible connected servers appears in the Server Name section.
2. Change the name of the connected servers by selecting the server and typing a
new name. Click to save changes.
Note! Server names left as UNUSED cannot be accessed.
Install switch definition file
Where the KVM switch type is not listed in the manufacturer/model drop-down
lists, contact Minicom to request an updated Switch Definition file with the desired
KVM switch listed.
1. Load the file onto the Client computer.
2. Locate and install the KVM switch definition file. The switch definition file is
updated.
16. Administration > Serial Settings
Where you have a Serial device connected to the system you must configure the
RS232 settings.
To do so:
From the menu click Serial Settings, the Serial Settings appear, see Figure 11.