Automatic Power System Owner's Manual

2
Introduction
Congratulations! You’ve purchased the most advanced, feature-rich integrated inverter/battery
charger on the market. Your APS provides your equipment with utility-supplied AC power, when
present. During a blackout, overvoltage or brownout, your APS automatically switches over to an
external battery source to power connected equipment with voltage and frequency-controlled
AC power.
Multi-Function Indicator Lights
Two sets of indicator lights keep you constantly informed of battery charge levels, fault conditions and
APS operation. One set of multi-function lights displays battery charge conditions and fault warnings.
The second set of multi-function lights displays APS operation conditions.
Multi-Operation Switches
Two control points give you convenient options when operating your APS. Set a variety of voltage
levels at which your APS’s inverter will turn on to maximize equipment protection and minimize battery
drain. Other options include a remote-control setting for greater convenience and a battery type
setting for greater charging efficiency.
Frequency-Controlled Output (Invert Mode)
Your APS controls line frequency so frequency-sensitive equipment can operate properly.
Automatic Overload Protection
If you overload your APS, it will automatically protect itself and your valuable batteries from damage.
200002089 APS Manual 230 Volt Version.p65 5/31/00, 4:30 PM2