Automatic Power System Owner's Manual

3
High Efficiency Output
Your APS’s advanced circuitry produces
a more efficient DC-to-AC conversion,
minimizing energy loss. This allows you
to run connected equipment longer
between battery charges. The APS will
maintain this highly-efficient output even
as the battery charge decreases.
Advanced, 3-Stage
Battery Charger
Your APS recharges your battery faster
than conventional chargers because
its three-stage charger profiles (Bulk,
Absorption and Float) are optimized,
regardless of the type of battery you
use (Wet or Gel).* In addition, the
advanced charging system protects
against over-charge and over-
discharge to ensure a longer service
life from your battery.
* The Absorption and Float levels vary according to battery
type which is field settable either "Wet" or "Gel" Cell.
This manual contains important instructions and warnings that should be followed during the
handling, installation, operation and storage of Tripp Lite APS Automatic Power Systems.
Stage 1
Bulk
Stage 2
Absorption
Stage 3
Float
200002089 APS Manual 230 Volt Version.p65 5/31/00, 4:30 PM3