Datasheet

Remote Control Module for Tripp Lite PowerVerter
Inverter/Chargers
MODEL NUMBER: APSRM4
Description
Tripp Lite's APSRM4 provides remote monitoring and control of select Tripp Lite PowerVerterInverters (PV
series) and Inverter/Chargers (RV, APS and EMS series) which feature an RJ-style connector. The remote
module's compact housing includes a switch (which controls the operation of the connected Inverter or
Inverter/Charger) as well as two sets of intuitive "traffic light" LEDS. LEDs indicate approximate battery charge
and load level when used with an Inverter. LEDs indicate appropriate battery charge or charge rate (depending
on switch position) and operational status. Alternate LED labeling is provided. The module also includes
mounting slots/holes for multiple mounting options (with user-supplied screws) including behind or below a
dashboard or compartment. An attractive face plate is included for additional front-panel mounting options for
RV, marine or vehicular detailing. A daisy-chain port links the module to an Inverter or Inverter/Charger with an
included 50-ft. cord. The port also allows multiple modules (sold separately) to connect together to control a
single Inverter or Inverter/Charger.
A Master Override Port enables automatic override of the Remote Control Module to shut off the connected Inverter or Inverter/Charger under various
safety/operational conditions: * Ignition ON (prevents TV or other distractions while driving)* Ignition OFF (prevents inadvertent battery drain while
parked)*Battery Disconnect (ensures safe shutoff when 12V electrical system is disconnected separately)* Water Encroachment (reduces shock hazard in
marine applications).
Features
Provides complete remote monitoring and control of Tripp Lite PowerVerter Inverters (PV series) and Inverter/Chargers (RV, APS and EMS series) which
feature an RJ-style connector
Intuitive "traffic light" LEDs display a variety of operational information
Versatile, durable, all-metal remote module allows front panel, rear panel or below dash mounting
Attractive face plate for additional front-panel mounting options for RV, marine or vehicular detailing
Daisy-chain capability allows additional remote modules (sold separately) to control a single Inverter or Inverter/Charger
Extra long, 50-ft. remote cord allows you to locate remote module virtually anywhere within your vehicle or boat
Master Override Port and included 25-ft. cable enable automatic override of the Remote Control Module to shut off the connected Inverter or
Highlights
Intuitive traffic light LED readouts
Complete remote monitoring and
control
Versatile design for front panel,
rear panel or below-dash
mounting
Master override capability
Includes remote module,
face-plate, 25-ft. master override
cord and 50-ft. remote control
cord
Applications
Ideal for remote monitoring and
control of select Tripp Lite
PowerVerter Inverters (PV
series) and Inverter/Chargers
(RV, APS and EMS series) which
feature an RJ style connector.
Package Includes
APSRM4 Remote Control Module
Face Plate
50-ft. Remote Control Cord
25-ft. Master Override Cord
LED labels and Instruction
Manual with Warranty Information
1 / 2