Owner`s manual

11
Basic Operation
WhenenabledforAuto-Detect,apass-throughkeyboardmodeisenabledinwhichkeystrokesare
sentdirectlytothecomputerwithoutrstgoingthroughtheMacorSunemulator.
List KVM Settings
ThisfunctionallowsyoutodisplayalistofthecurrentKVMsettings;Hotkeys, Keyboard OS,
Keyboard Emulation, Mouse Emulation, Mouse Port Switching, Power on detectionandKeyboard
Language.Toperformthisfunction,dothefollowing:
1. OpenupaWord,Wordpad,NotepadorExcelle
2. ActivateHotkey Setting Modeusingtheaforementionedcommand
3. Pressandreleasethe[F4]key
USB Keyboard/Mouse Reset
Intheeventthatthekeyboardandmousearenotoperatingcorrectly,aresetmaybeneeded.To
performaUSBkeyboard/mousereset,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[F5]key
Keyboard Language
Bydefault,thekeyboardlanguageissettoEnglish,butitcanbechangedtoeitherFrenchor
Japanese.Tochangethekeyboardlanguage,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressthe[F6],[nn]*and[Enter]keysinsuccession.
*nn represents a two-digit keyboard language code. 33 is for US English, 08 for French, and 15 for Japanese.
Hotkey Beeper Control
Whenperformingakeyboardhotkeycommand,abeepersoundstoindicatethatthecommandis
takingplace.Thisbeepersoundcanbetoggledon/offbyperformingthefollowingcommand:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[B]key
Disable Port Switching Hotkeys
Bydefault,PortSwitchingHotkeysareavailablethatallowyoutoswitchbetweenports.Todisable
thePortSwitchingHotkeysandrequirethefrontpanelpushbuttonstobeusedforswitching
functions,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[x]keyandthenpressandreleasethe[Enter]key
Firmware Upgrade Mode
TheB004-DUA2-HR-KandB004-DUA4-HR-Krmwarecanbeupgradedasupdatesbecome
availableonTrippLite’swebsite(SeetheFirmware Upgradesectioninthismanualfordetails).In
ordertoperformarmwareupgrade,Firmware Upgrade Modemustrstbeinitiated.Toinitiate
Firmware Upgrade Mode,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Keyinthetextupgrade
3. Pressandreleasethe[Enter]key
TheLEDsonthefrontoftheKVMashtoindicatethatFirmware Upgrade Modehasbeeninitiated.
Restore Default Settings
TorestoretheKVMtoitsfactorydefaultsettings,dothefollowing:
1. ActivateHotkey Setting Modeusingtheaforementionedcommand
2. Pressandreleasethe[R]key,andthenpressandreleasethe[Enter]key
14-03-189-93334F.indd 11 4/18/2014 4:43:59 PM